|
 |
| |
|
ACCESSORIES
|
|
End Caps for Beams
A. Maxispan End Cap
B. H.D.Box I-Beam End Caps
C. Polybeam and Box I-Beam End Caps
Application: The end caps are used to plug the open end
of the beams, promoting optimum sanitation
|
|
|
Skid Cap
Designed to be used with the Polybeam, Box
I-Beam
and H.D.Box I-Beam
Application: To be used when the beam is resting on
a
minimum 2” (5cm) recess ledge Note: When using the skid cap,
you will not require and End Cap
|
|
|
End Bracket
Designed to be used with the Polybeam,
Maxispan,
Box I-Beam and the H.D.Box I-Beam
Application: To be used when the beam can be
fastened to
the walkway
|
|
|
Plastic Wall Bracket
Designed to be used with the Polybeam, Box
I-Beam
and the H.D.Box I-Beam.
Application: To be fastened to the pit wall to span
across the pit
|
|
|
Leg Set with 1” Polyrod
Designed to be used with the Polybeam,
Maxispan,
Box I-Beam and the H.D.Box I-Beam.
Application: To be used as an intermediate support where
the beams extend beyond the recommended spanning distance. The 1”
Polyrod is adjustable to a maximum height of 6’ or 16” free standing
height
|
|
|
Polyrods
A. 1” Polyrod
B. 3/4” Polyrod
C. 1/2” Polyrod
D. 3/8” Polyrod
|
|
|
18 x 18 Nursery Filler
-Designed to be used with the Polygrate
Nursery
Gro-More 18 x 18
Application: To be used as a filler piece instead of
cutting a full piece.
|
|
|
18 x 18 Nursery Edge Strips
-Designed to be used with the Polygrate
Nursery
Gro-More 18 x 18
Application: To be used to finish off the edge of the
floor along the wall
|
|
|
40 x 40 Farrowing Filler
-Designed to be used with the Polygrate 40 x
40 and
the Polygrate Challenger
Application: To be used as a filler piece instead of
cutting a full piece.
|
|
|
40 x 40 Farrowing Edge Strips
-Designed to be used with the Polygrate 40 x
40 and
the Polygrate Challenger
Application: To be used to finish off the edge of the
floor along the wall
Note: 40 x 40 Edge
strips and Filler will require 1 1/2 pieces for every 1- Challenger
piece
|
| |
|
|
|
